FEED / Detail Engineering:

• Preparation of instrument index, instrument DCS/PLC (ESD) Input / Output list.
• Preparation of specification of Control system (DCS / Foundation Fieldbus/PLC) as per client’s requirement.
• Preparation of specifications & datasheets for various Field Instruments like Control valves, ESD Valves, MOVs, transmitters (Pressure & Differential Pressure, Flow, Temperature, Level), flow elements (Orifice plate, Venturi Flow element), special flow meters, F&G related Sensors, local instruments etc.
• Control Valve selection & Sizing
• Instrument Sizing calculation / verification
• Preparation of FUNCTIONAL LOGIC DIAGRAMS based on Process interlock write up
• Interdisciplinary discussion
• Preparation of instrumentation location layout drawings
• Preparation of instrument loop drawings
• Preparation of instrument hook-up drawings
• Preparation of instrument JB termination
• Preparation of instrument cable Tray routing / Cable schedule
• Preparation of control room layout drawings
• Preparation of graphics required for Control system
• Preparation of Bill of Material
• Inspection assistance during FAT as per standard procedure.
• Supervision during erection and commissioning.
• Preparation of cost estimates and man-hour estimates.
• As –Built as per site mark-up / as per Company standards
• Manpower supply (Engineers, Designers)

Wellhead Engineering:

• Preparation of Data sheets of Instruments related to High Press Gas wells / Oil wells, water wells – Hydraulically operated Valves, Well Head Control Panel (WHCP)
• RTU / well mounted system wiring diagram
• Engineering related to Cluster of Wells
• Preparation of instrument cable trench drawings
• Preparation of Hydraulic hook-up drawings

Procurement Assistance:

• Vendor offer evaluation and preparation of TBA (Technical Bid Analysis) for Control systems, Field Instruments, Well head related Instruments / Control systems / WHCP
• Vendor Drawing review (VDR)
• Review of various mechanical packages such as HV Pumps/Motors, Compressors, Chemical Injection skid, metering skid, ETC.

Process Functional Safety management:

• SIL Assessment Facilitation (Risk Graph / LOPA)
• Safety Requirement Specification (SRS)
• SIS Design & Engineering (called verification)
• SIL validation (before plant start-up / re-start)
• Revalidation SIL Assessment
• Functional Safety Assessment (FSA – 1,2,3,4)
• Functional Safety Management (FSM, Plan, Verify)
• SIL Audits
• Training (customized as per client requirements)
• Existing Plant Gap assessments for FS Status